High Pressure Cleaning Pump Benefits

Research and production practice show that the high pressure water jet cleaning technology is a reliable, economical and practical cleaning technology. Compared with chemical cleaning, high-pressure water jet cleaning technology has the following advantages.
(1) Good cleaning quality
When the high pressure water jet cleans the inner hole of the pipe and heat exchanger, the scale and blockage in the pipe can be removed completely, and the metal body can be seen. High pressure water jets with huge energy and supersonic movement can completely destroy hard scale and blockage, but have no destructive effect on metal. At the same time, because the pressure of high-pressure water is less than the compressive strength level of metal or reinforced concrete, high-pressure water jet cleaning will not damage the cleaned matrix.
(2) Fast cleaning speed
Due to the combined crushing effect of water jet washing, wedge splitting, shear, grinding, etc., the scale can be quickly broken off, which is several times to ten times faster than the traditional chemical methods, sandblasting and shot blasting methods, simple mechanical and manual methods. At the same time, the parts cleaned by high pressure water jet do not need to be cleaned twice; After chemical cleaning, it is necessary to clean the chemical agents on the surface with water.
(3) No environmental pollution
Because the high pressure water jet cleaning is water as the medium, so water jet cleaning is not like sandblasting shot blasting and simple mechanical cleaning to produce a lot of dust, pollute the atmospheric environment, damage human health; It is not like some chemical cleaning, which produces a large amount of waste liquid to pollute the river, soil and water quality. With clean water as the medium of the water jet, odorless, tasteless, non-toxic, spray jet atomization, can also reduce the concentration of air dust in the operation area, reduce to the national safety standards below, so it will not cause any pollution. In addition, the recovery of high-pressure water jet cleaning fluid is also relatively easy to achieve technically.
(4) Wide range of application
High-pressure water jet cleaning can clean parts with complex shape and structure, and can be cleaned under narrow and complex space and poor operating environment. There are no special requirements for equipment material, characteristics, shape and scale species, but only require direct shooting, so its application is very wide.
(5) Easy to mechanization and automation.
(6) Energy saving, water saving, low cleaning cost
The medium used by high pressure water jet is tap water, which is easy to source and universal. In the cleaning process, because of the powerful energy, without adding any fillers and detergents, you can clean it, so the cleaning cost is low, about only 1/3 of the chemical cleaning. Secondly, the water jet cleaning method is different from the fire water cannon, which is a fine jet injection, and the nozzle diameter used is only 0.5-2.5mm, so the water consumption is small, and the power used is 37-90kW, so it is a water-saving and energy-saving equipment.