Does the high-pressure cleaning pump have any special requirements for water quality?

1. Impurities in water: The high-pressure cleaning pump requires the impurities in the water to be as few as possible. The filtration accuracy of the water inlet filter configured by the equipment is 100-150 mesh, and the general water quality is not a big problem.
2. Acidic and alkaline water and cleaning agents: Various general-purpose high-pressure water cleaning machines can be used for various acidic and alkaline water and cleaning agents in principle, but there are conditions and restrictions, and they cannot be operated under these liquids for a long time. It is no problem to use it for one or two hours. After use, the acid and alkali liquid in the pump must be replaced with clean water. It cannot be retained in the pump and pipeline system for a long time, otherwise it will seriously corrode the internal structure of the pump.
3. Use of tap water: The high-pressure pump of an ordinary high-pressure cleaning machine must use clean tap water. In principle, it cannot be used for various acidic and alkaline water and cleaning agents. It will corrode the internal structure of the high-pressure pump, especially the seals are easily damaged.
4. Special industry needs: Some special industries need to work in seawater or corrosive liquids for a long time, or have high requirements for the cleanliness of seawater (such as reverse osmosis water treatment, key processes such as food and pharmaceuticals, high-tech electronic basic parts manufacturing, chemical industry, etc.) to use special stainless steel pump high-pressure cleaning machines.
5. Inlet water temperature: Most high-pressure cleaning machines have certain requirements for the inlet water temperature. If the inlet water temperature is greater than 40 degrees Celsius, it will cause equipment damage.
6. Water supply: For the high-pressure pump of the high-pressure cleaning machine to work properly, there must be sufficient water supply.
7. Filter maintenance: Check the water inlet filter regularly to ensure that it is not blocked or damaged; when checking, replacing, and cleaning the filter, prevent solid particles from entering the pump and nozzle through the water inlet pipe.